{"id":1891,"date":"2016-02-14T13:35:08","date_gmt":"2016-02-14T12:35:08","guid":{"rendered":"http:\/\/dc2wk.schwab-intra.net\/?page_id=1891"},"modified":"2016-02-14T13:35:08","modified_gmt":"2016-02-14T12:35:08","slug":"dmr","status":"publish","type":"page","link":"https:\/\/dc2wk.schwab-intra.net\/?page_id=1891","title":{"rendered":"DMR"},"content":{"rendered":"

Retevis RT3 DMR Radio<\/strong><\/span><\/p>\n

I use now a DMR Handheld radio. This is a low budget Retevis RT3 (same as MD380). For the money at about 130\u20ac, it\u2019s a great radio!<\/p>\n

\"Retevis<\/p>\n

\"IMG_4425\"
\nI use a military RG58 cable (only 6 m long) to the 6 element beam.
\nI crimp it directly to the SMA Jack.<\/p>\n

\"IMG_4424\"
\nThe Retevis Mike you can optimize with a little hole over the microphone capsule.<\/p>\n

\"IMG_4426\"
\nThis is my 6 element beam for DMR<\/p>\n

\"micpinouts\"
\nHere you can see the pin out for a Retevis Mike.<\/p>\n

Here is a Link to a homebrew USB cable:
\nTytera MD380 USB to Cable Pinout Diagram v2<\/a><\/p>\n

I have made my codeplugs with my own logic and order. I find it this way a lot of easier. See your self.<\/p>\n

Here you can download my own Codeplugs from here:
\nRetevis RT3 (MD380) Codeplugs Download<\/a><\/p>\n

Anleitung zum Codeplug \/ Manual for the Codeplugs:<\/span><\/strong>
\nIn Abschnitt “Generel Settings” steht rechts “MYCALL” und \u00a0“12345678”.
\nDiese beiden Informationen durch Euer Rufzeichen und Euere DMR Call-ID ersetzen.<\/p>\n

Ich empfehle keine Fake Call-ID zu verwenden. In meinen Augen kommt das einen Rufzeichen Missbrauch gleich!<\/p>\n

In section “Generel Settings” to the right, you can see “MYCALL” and “12345678”.
\nReplace these two information by your call sign and your DMR Call ID.<\/p>\n

I recommend to use no Fake Call-ID. In my eyes, that’s the same as a call sign abuse!<\/p>\n

Videos with my Retevis:<\/strong><\/span><\/p>\n